Plan drain, lubrication and service cycles for pneumatic components by element type and cycle length, generated as a maintenance calendar with due-date reminders.
| Item | Formula / Note | Source / Standard |
|---|---|---|
| Maintenance intervals | Draining, lubrication and inspection intervals are set by operating hours and cycle counts | ISO 4414:2010, Pneumatic fluid power - General rules and safety requirements for systems |
| Compressed air quality classes | Quality is classified by particles, water and oil content, which sets the maintenance burden | ISO 8573-1:2010, Compressed air - Part 1: Contaminants and purity classes |
| Pressure dew point | A higher pressure dew point means more water and more frequent draining | ISO 8573-1:2010, Compressed air - Part 1: Contaminants and purity classes |
| Lubricator consumption | Oil consumption is estimated from air consumption and the set drip rate | ISO 4414:2010, Pneumatic fluid power - General rules and safety requirements |
面向氣動系統點檢維保的計劃工具，內建常見元件維護週期模板，按上次維護日期自動排程，逾期與臨近任務優先提醒。