视频码率计算器

🧮 Video Bitrate Calculator

📐 工作原理与说明
视频文件大小估算
文件大小(MB) = 码率(Mbps) × 10⁶ ÷ 8 ÷ 1024 ÷ 1024 × 时长(分钟) × 60
(1 字节 = 8 bit;1 MB = 1024×1024 字节)
分辨率推荐码率:480p 2.5|720p 5|1080p 8|1440p 16|2160p(4K) 35 Mbps
H.265/HEVC 相比 H.264 可节省约 50% 码率达到同等画质
实际大小受编码器效率与画面复杂度影响
计算视频码率与预估文件体积。
  • 关系:码率 = 文件大小 ÷ 时长,常用单位为 kbps 或 Mbps。
  • 估算:文件大小 ≈ 码率 × 时长 ÷ 8(除以 8 把比特转为字节)。
  • 影响因素:分辨率、帧率、编码器(H.264/H.265/AV1)与画面复杂度共同决定所需码率。
  • 合计:总码率为视频码率与音轨码率之和。

Estimate video file size from resolution, frame rate, duration, and bitrate, with recommended bitrates per resolution.

📚 深度解析:Video Bitrate Calculator

💡 常见使用场景

  • 按时长与码率估算文件大小。
  • 规划存储与带宽:按时长与目标码率估算文件大小,确认硬盘容量或 CDN 流量是否够用。
估算
10 分钟(600s)@5 Mbps → 5e6×600/8 = 375 MB;4K@15Mbps 同长 ≈ 1.13 GB。

❓ 常见问题(FAQ)

码率越高越清晰?
同分辨率下码率越高细节越好,但有收益拐点。
为什么估算和实际差很多?
三点原因:一是多数编码使用可变码率(VBR),实际平均码率随画面复杂度波动,与设定目标值不同;二是音频轨道也占体积,忽略会低估;三是容器封装与元数据有额外开销。因此估算值应作为量级参考,精确值以实际编码结果为准。

Formula & Standard References

Item Formula / Note Source / Standard
Bitrate formula bitrate = file_size_bits / duration_seconds Video encoding practice
Size estimate size = bitrate * duration / 8 in bytes Video encoding practice
Resolution guidance 1080p30 typically 4-8 Mbps; 4K often 15-25 Mbps Streaming platform guidance
⚠️ 使用说明与注意事项