费用 = P(kW)·h·单价

Electricity Cost Calculator

Compute electricity cost from power rating, hours of use and the unit tariff, including daily, monthly and yearly totals.

📐 计算公式
电器电费(本页代码口径,功率 P 为瓦特须先转千瓦):电费 = P÷1000×h×rate(元,rate 为元/kWh);联动量:耗电量 = P÷1000×h(kWh)、单位时间成本 = 电费÷h(元/h)。校验:三项输入空值守卫,空值即提示;用电时长须 >0、功率与电价不得为负,否则提示并中止。判据:无固定分级,电费与功率、时长、电价线性相关,功率减半电费即减半。

输入功率 P(瓦)、用电时长 h(小时)与电价,求电费。

Formula & Standard References

Item Formula / Rule Source / Standard
Electricity cost formula Cost equals consumption in kilowatt-hours times the tariff, accumulated by tier where applicable. IEC 62052-11:2020, electricity metering equipment
Metering accuracy Energy meters are classified by accuracy class; a higher class means smaller measurement error. IEC 62053-21:2020, particular requirements for static meters
Demand charge Commercial users are often billed separately on maximum demand, independent of total consumption. IEC 62053 series & utility tariff practice
📌 计算说明
  • 先换算为千瓦时再计费。
  • 1.5kW×24h×0.6 → 21.6 元。

📚 深度解析:由功率、时长与电价求电费

💡 常见使用场景

分时电价优化
日用电 30 kWh,其中 20 kWh 移至谷段(0.3 元)替代峰段(0.9 元):原 30×0.58=17.4 元,优化后 10×0.9+20×0.3=15 元,日省 2.4 元、年省约 876 元。提示:储能/智能调度可放大收益。

❓ 常见问题(FAQ)

阶梯电价怎么算?
按累计用量分段计价,增量部分适用更高单价,因此高用量月费用非线性上升。
峰谷电价适合谁?
可转移负荷(储能、热水、充电桩)用户受益大;刚性实时负荷受益有限。